Resilient
Impact Recovery Bollards
Make Bollards reusable following even severe impact
what our clients
say
It is time to make bollards impact resistant, removable and replaceable — ready for disaster recovery, events, maintenance and upgrades. Static, rigid bollards are dangerous, costly and unsuited to the changing needs of modern cities.
02
All you need is this small change to transform your bollards
Innovation No.2 Impact Recovery Rings transform bollards from repetition to resilience- making bollards impact resistant, removable and reusable following impact
WE'RE MORE THAN JUST GOOD LOOKS
We're strong but we are kind too. When someone hits us- we don't get all bent out of shape, we are made to take the hard knocks and retain our good looks years after inferior bollards look like @#$%
WE SWEAR TO PROTECT YOU
Unlike "flexible" bollards that simply fold at the slightest sign of danger, we have a strong resistance core that prevents the bollard from deflecting beyond 20 degrees, protecting you and your assets
BUT YOU CAN'T PUSH US AROUND
Unlike spring loaded bollards we can't be deflected by hand, but when impacted by a vehicle we roll with the punches and like the true heroes we are, we slowly, elegantly self-recover, without any fuss!
WE CAN TAKE THE HARD KNOCKS
When severely impacted instead of hours of disturbance, all that rubble and money spent on new bollards and footings, you simply replace the resistance core (less than 5 minutes) and we're back on the job. No fuss!
Low Impact
Bollards remain rigid and appear to be everyday bollards (cannot be deflected by hand), but when impacted by a vehicle they absorb the impact force deflecting a maximum of 20 degrees and self-recovering, with no diminished capacity following hundreds of impacts.
Severe Impact
When severely impacted by a utility vehicle or truck, instead of the entire footing being damaged or dislodged, the foundations remain undamaged. The inner resistance core bends allowing the bollard to fold but not be dislodged- preventing any further forward movement of the vehicle
Fast efficient replacements
Following severe impact, the bollard is easily removed (low cost resistance core replaced) and reinstated in around 5 mins. Expensive Foundations, Bollards and ZERO Impact Recovery Rings are all re-usable impact after impact, saving thousands over the life of a development
A lifetime of savings
Replacing this cheap ten dollar pine bollard was costing the council $500- $1000 every time. The Impact Recovery System eradicates the cost of continually replacing the bollard and expensive footings for the next hundred years, saving thousands.
Safer
The shock absorbing mechanism reduces the impact force of a vehicle and the strong resistance core prevents any forward movement of vehicles, protecting pedestrians and preventing the bollard from being ripped from the foundations, becoming a dangerous projectile.
Bollard reusable
The bollard casing is protected from damage prolonging its lifespan and Impact Recovery Rings are re-usable following hundreds and hundreds of impacts.
The only replaceable component is the resistance core.
Foundations reusable
ZERO WASTE Foundations are reusable for the next 100 years, greatly improving safety and efficiency of developments and removing the need for replacing the surrounding concrete and paving (and resulting waste) for the next 100 years
ZERO Waste
Bollards and ZERO Impact Recovery Rings are all re-usable impact after impact, saving thousands over the life of a development. The most durable bollards are the Advanced Polymer & Stainless steel as Powder coating can chip if impacted regularly
ZERO Expensive maintenance
By far the majority of impacts in carparks are from slow moving vehicles. Allowing the bollard to absorb the impact force and deflect up to twenty degrees eradicates the majority of maintenance on carpark bollards. If badly impacted they are replaced in less than 5 minutes - no disturbance.
Advanced Polymer Bollards
Highly durable Non-Conductive Bollards made from Advanced Polymers are impact, scratch, dent resistant, will not chip or fade like powder coated bollards. Western Power/ Synergy Approved.
In-ground Advanced Polymer bollards Western Power
In-ground
You can install Advanced Polymer Bollards in-ground, or using the Impact Recovery System (making bollards and foundations re-usable even following severe impact)
Suggest Impact Recovery System when bollards may be subject to severe impact.
In-ground Impact Recovery bollards
Surface Mount
You can surface mount Advanced Polymer Bollards using the Impact Recovery System (making bollards and foundations re-usable even following severe impact)
Perfect for carparks and locations where bollards will receive light impact
Surface Mount Impact Recovery bollards
Carparks
Great for carparks. Highly durable Bollards made from Advanced Polymers are impact, scratch, dent resistant, will not chip or fade like powder coated bollards and are non-conductive. Secured using Impact Recovery System bollards become reusable even following severe impact
Impact Tested to 10 kmph
Bike Paths
Low Impact Safety Bollards were developed for MRWA to prevent vehicle entry to bike paths but also reduce the risk of injury to bike riders, reduce the cost of maintenance, preserve footpaths and surrounding paving and be removable to allow access for service vehicles. MRWA striping available
Low Impact Bike Path Bollards (MRWA)
Shopfronts
An every day surface Mount bollard (and any lightweight bollard) will not prevent vehicle entry. For shopfronts we recommend surface Mount Impact Recovery to provide visual deterrent and Inground Impact Recovery to prevent vehicle entry
Photo Surface Mount steel bollard following impact
Disabled Bays
Unlike steel bollards, Advanced Polymer Bollards are far more durable and won't damage vehicles if impacted. They don't fade, dent or scratch like steel bollards and with no springs, bollards won't become "floppy" over time and cause litigation risks.
Surface Mount Impact Recovery bollards
Shopping centre carparks
Great for shopping centre carparks as bollards are far more durable than steel or traditional plastic bollards and available in almost any colour. If secured using the Impact Recovery System Bollards and footings are reusable following even severe impact
Photo of Advanced polymer bollards
Protect Electrical infrastructure
Unlike steel bollards, Advanced Polymer Bollards are far more forgiving- able to absorb light impact and self recover. If secured using the Impact Recovery System
Bollards and footings are reusable following even severe impact. Western Power Approved
Photo of in-ground steel bollards
Stop damage to footings!
Unlike steel bollards, Advanced Polymer Bollards are far more forgiving- able to absorb light impact and self recover. When secured using the Impact Recovery System
Bollards and footings become reusable following even severe impact - saving thousands
Photo of in-ground steel bollards
Stop damage to vehicles!
Unlike steel bollards, Advanced Polymer Bollards are far more forgiving with a soft surface - protecting vehicles against damage when impacted. If secured using the Impact Recovery System Bollards they provide even greater protection against damage
Photo of dented vehicle
Dent resistant
Most plastic bollards / bollard covers are 1-3 mm thick, so dent and crack if impacted. ZERO bollards & covers are 7 mm thick (made from a material that will self-recover from impact) making them highly resistant to impact and denting - greatly improving resilience and lifespan
Photo : Zero Bollards shown on right
Stainless Steel Bollards
Our Stainless steel bollards are of extremely high quality - designed to withstand impact they are made from Australian stainless steel pipe (heavy duty) and polished to provide a clean satin finish (the most durable finish)
Surface Mount Impact Recovery bollards City of Perth
Replacements are simple!
2
Reinstall same bollard
The resistance core is then dropped into the socket automatically locking in (or secured to base plate using a securing stud) , the bollard is simply slipped back on and the securing stud re-inserted.
IMPACT RECOVERY SYSTEM
-
DIRECTIONS FOR USE
-
VIDEO
-
AS/NZS 3845.2 CERTIFICATION
If you can't find what you're looking for- please use the contact form to contact us or call us on 0414628511
-
STEEL BOLLARDS
-
STAINLESS STEEL BOLLARDS
-
IMPACT RECOVERY SYSTEM