Resilient
Non-conductive Bollards
Suitable for Western Power projects
Advanced Polymer Bollard
Impact Resistant - flexible
Advanced Polymer Bollards are rigid like a steel bollard, but wont chip, fade or dent like a steel one and they "flex" upon light impact (such as carpark impact) from a vehicle and recover without damage to vehicle. Any marks can be wiped clean.
Not cheap Plastic! These bollards resist warping fading and deformation better than recycled plastic alternatives. Refer to Specs for details.
Can be concrete filled
You can now purchase separate caps to enable bollards to be easily concrete filled. Please Note we do not recommend concrete filling them as it removes the ability to "flex" upon impact from vehicle
Improved resilience
If badly impacted the bollard and footings may need replacing- For improved reslience to impact refer to Impact Recovery option below.
Bollard "Flexes" upon impact from vehicle
Deflects 20 Degrees upon impact from vehicle
Impact Recovery -
The Ultimate Carpark Bollard
Available in almost any colour in Steel, Stainless Steel or Advanced Polymer this bollards is rigid (cannot be deflected by hand)
This bollard uses Impact Absorbers to absorb vehicle impact and enable the bollard to deflect a maximum of 20 degrees (before hitting the strong resistance core) and slowly, safely recovering from vehicle impact
Reusable following severe impact
If badly impacted by a truck, or utility vehicle the low cost resistance core can bend and need replacing. Both the footings and bollard are re-usable and bollard is replaced in around 5 minutes.
Concrete filling bollards
Caps can be purchased to enable simple filling with concrete- Please Note concrete filling the bollard will remove the ability to "flex" upon impact and self-recover, increasing the impact force upon the footings and the chances of damage to the surrounding foundations.
If badly impacted by a truck, or utility vehicle the bollards and surrounding footings may need replacing and because the bollard is filled with concrete, both the footings and bollard must be sent to landfill.
ADVANCED POLYMER IMPACT RESISTANT BOLLARDS
SURFACE MOUNT
IMPACT RECOVERY BOLLARDS
INGROUND
IMPACT RECOVERY BOLLARDS
ADVANCED POLYMER BOLLARD COVERS
Based in Balcatta WA we stock non-conductive Safety Yellow Western Power Bollards made from UV Resistant Polymers that outlast and outperform other non-conductive bollards. They won't fade, dent or crack like traditional plastic or solid rigid recyled bollards. Because they have a heavy wall, but are hollow , they can absorb impact force and recover unlike solid bollards that simply fold upon impact.
Our Advanced Polymer is highly durable material designed to withstand impact from a vehicle and the harsh Australian environment. Polyethylene is an efficient electrical insulator, making it great for applications where safety is paramount. We use a crosslinked UV stabilized HDPE, Ultra-High Molecular Weight Polyethylene thermosetting polymer providing excellent impact resistance, and durability. An in-house QA system is in place to provide reliability and continuity of supply. Non-conductive Bollards made from Advanced Polymers. Western Power Approved non-conductive Bollards, Perth.
Advanced Polymer Bollards
Highly durable Non-Conductive Bollards made from Advanced Polymers (unlike solid bollards) are impact resistant, scratch , dent resistant, will not chip or fade like powder coated bollards. Western Power/ Synergy Approved.
In-ground Advanced Polymer bollards Western Power
In-ground
You can install Advanced Polymer Bollards in-ground, or using the Impact Recovery System (making bollards and foundations re-usable even following severe impact)
Suggest Impact Recovery System when bollards may be subject to severe impact.
In-ground Impact Recovery bollards
Surface Mount
You can surface mount Advanced Polymer Bollards using the Impact Recovery System (making bollards and foundations re-usable even following severe impact)
Perfect for carparks and locations where bollards will receive light impact
Surface Mount Impact Recovery bollards
Carparks
Great for carparks. Highly durable Bollards made from Advanced Polymers are impact, scratch , dent resistant, will not chip or fade like powder coated bollards and are non-conductive. Secured using Impact Recovery System bollards become reusable even following severe impact
Impact Tested to 10 kmph
Bike Paths
Low Impact Safety Bollards were developed for MRWA to prevent vehicle entry to bike paths but also reduce the risk of injury to bike riders, reduce the cost of maintenance, preserve footpaths and surrounding paving and be removable to allow access for service vehicles. MRWA striping available
Low Impact Bike Path Bollards (MRWA)
Shopfronts
An every day surface Mount bollard (and any lightweight bollard) will not prevent vehicle entry. For shopfronts we recommend surface Mount Impact Recovery to prove visual deterrent but Unground Impact Recovery to prevent vehicle entry
Photo Surface Mount steel bollard following impact
Disabled Bays
Unlike steel bollards, Advanced Polymer Bollards are far more durable and won't damage vehicles if impacted. They don't fade, dent or scratch like steel bollards and with no springs, bollards won't become "floppy" over time and cause litigation risks.
Surface Mount Impact Recovery bollards
Shopping centre carparks
Great for shopping centre carparks as bollards are far more durable than steel or traditional plastic bollards and available in almost any colour. If secured using the Impact Recovery System Bollards and footings are reusable following even severe impact
Photo of Advanced polymer bollards
Protect Electrical infrastructure
Unlike steel bollards, Advanced Polymer Bollards are far more forgiving- able to absorb light impact and self recover. If secured using the Impact Recovery System
Bollards and footings are reusable following even severe impact. Western Power Approved
Photo of in-ground steel bollards
Stop damage to footings!
Unlike steel bollards, Advanced Polymer Bollards are far more forgiving- able to absorb light impact and self recover. When secured using the Impact Recovery System
Bollards and footings become reusable following even severe impact - saving thousands
Photo of in-ground steel bollards
Stop damage to vehicles!
Unlike steel bollards, Advanced Polymer Bollards are far more forgiving with a soft surface - protecting vehicles against damage when impacted. If secured using the Impact Recovery System Bollards they provide even greater protection against damage
Photo of dented vehicle
Dent resistant
Most plastic bollards / bollard covers are 1-3 mm thick, so dent and crack if impacted. ZERO bollards & covers are 7 mm thick (made from a material that will self-recover from impact) making them highly resistant to impact and denting - greatly improving resilience and lifespan
Photo : Zero Bollards shown on right